Contents inside this Modal are only authorable inside of this page.

Safety and driver-assistance technologies

Safety Alert Seat

Safety Alert Seat uses left-, right- or both-side driver seat vibration pulses* to help you detect and identify the direction of potential crashes. You can also switch to beeping crash-avoidance alerts.

Buckle to Drive

Buckle to Drive helps remind the driver to buckle their seat belt before driving by preventing the vehicle from being shifted out of Park temporarily when the driver’s seat belt is not buckled. On some vehicles, the feature also reminds the front passenger to buckle up.

Teen Driver

When a Teen Driver-designated key fob is used, Teen Driver helps encourage better driving habits for teens by providing an in-vehicle report card. It also activates certain safety systems when a Teen Driver designated key fob is used and mutes the radio until the front-seat occupants fasten their seat belts.

Rear Park Assist 

When in Reverse, Rear Park Assist provides alerts of nearby detected vehicles and objects behind your vehicle to help you park and avoid collisions.

Adaptive Cruise Control

Adaptive Cruise Control helps you automatically maintain a selected following gap from the vehicle ahead. This feature allows you to set a cruise control speed and automatically follow a detected vehicle ahead at a driver-selected following gap. If no vehicle is detected in your path, the feature works like regular cruise control. You can always override the feature and take control.

Following Distance Indicator

Following Distance Indicator displays the following time in seconds between your vehicle and a detected vehicle you’re following to help you maintain a safe following distance.

Forward Collision Alert

Forward Collision Alert can warn you if it detects a potential collision with a detected vehicle you’re following so you can take action. It can also provide a tailgating alert if you’re following a vehicle much too closely.

IntelliBeam auto high beams 

At speeds above 25 mph, IntelliBeam can automatically turn the vehicle’s high beams on and off according to surrounding traffic conditions.

Lane Keep Assist with Lane Departure Warning

Lane Keep Assist with Lane Departure Warning uses a brief steering wheel turn to alert you when it detects you are unintentionally drifting out of your lane lines. If needed, you may receive additional Lane Departure Warning alerts. System alerts do not occur if you’re using your turn signal, or it detects you may be intentionally leaving your lane.

Enhanced Automatic Emergency Braking

At speeds above 2 mph, Enhanced Automatic Emergency Braking can help you avoid or reduce the severity of a collision with a detected vehicle you’re following. Radar and camera technology are used to automatically provide hard emergency braking or enhance the driver’s hard braking.

Blind Zone Steering Assist

Blind Zone Steering Assist can alert you and provide a brief, firm turn of the steering wheel when a potential crash is detected with a moving vehicle in the lane you’re entering.

Front Pedestrian and Bicyclist Braking

At speeds between 5 and 50 mph, Front Pedestrian and Bicyclist Braking can help you avoid or reduce the severity of a collision with a pedestrian or bicyclist it detects directly in front of you. It provides alerts and can automatically provide hard emergency braking or enhance the driver’s hard braking. It has limited nighttime and low-visibility performance.

Reverse Automatic Braking

Reverse Automatic Braking alerts you and/or automatically provides hard emergency braking to help avoid collisions with detected vehicles and objects directly behind you when you’re in Reverse.

Rear Pedestrian Alert

When you’re in Reverse, Rear Pedestrian Alert can alert you to detected pedestrians directly behind your vehicle. It has limited nighttime and low visibility performance.

Intersection Automatic Emergency Braking 

Intersection Automatic Emergency Braking can help you avoid or reduce the severity of an intersection collision with a detected cross-traffic vehicle. It provides alerts and can even automatically provide hard emergency braking or enhance the driver’s hard braking.

Side Bicyclist Alert

Side Bicyclist Alert alerts you to a detected bicyclist that is approaching a side blind zone. Also, during a brief time after parking, the feature can alert you when a detected bicyclist is approaching so you don’t open your door.

Traffic Sign Recognition

Traffic Sign Recognition can display detected speed limit signs in your instrument cluster. For full functionality, Traffic Sign Recognition requires an active eligible OnStar® plan*.

Rear Cross Traffic Braking

When you’re in Reverse, Rear Cross Traffic Braking alerts you and automatically provides hard emergency braking to help prevent a collision with detected vehicles crossing behind you.

HD Surround Vision

HD Surround Vision provides selectable digital camera views of the area around your vehicle to help you park and avoid vehicles and objects. You can also display a guideline to show where your vehicle is heading.

Safety or driver-assistance features are no substitute for the driver’s responsibility to operate the vehicle in a safe manner. The driver should remain attentive to traffic, surroundings and road conditions at all times. Visibility, weather and road conditions may affect feature performance. Read the vehicle Owner’s Manual for more important feature limitations and information.