Super Cruise is the first true hands-free driver assistance technology for compatible roads. It uses cameras, sensors, GPS data and LiDAR-scanned map data, and steers to maintain the vehicle’s position in a lane. It works with Adaptive Cruise Control, which helps you automatically maintain a selected following gap from the vehicle ahead. On select vehicles, Super Cruise can also make lane changes. In vehicles equipped with Turn Signal Activated Lane Change, the vehicle executes the lane change once the driver activates the turn signal. In vehicles with Automatic Lane Change, Super Cruise can execute lane changes automatically when enabled in the vehicle Settings menu.

Available Super Cruise hands-free driver assistance technology only works on compatible roads that have been mapped out by GM. Luckily, more than 600,000 miles of roads are compatible with Super Cruise, including both divided and non-divided highways. These roads have been specially mapped by LiDAR to provide Super Cruise the data needed for hands-free driving. Explore the map of Super Cruise enabled roads here to find ones on the way to your next destination.

Super Cruise is available on the 2025 and 2026 Buick Enclave, when properly equipped.

Super Cruise uses cameras, sensors, GPS information and high-definition LiDAR map data to steer and maintain the vehicle’s position in the current lane. The system works with Adaptive Cruise Control, which is designed to detect vehicles traveling in the same direction in its path and accelerate or brake the vehicle to maintain a driver-selected following distance from the vehicle ahead, even in stop-and-go traffic conditions. However, you still need to pay attention and keep your eyes on the road while using Super Cruise.

No. Super Cruise is not a self‑driving or autonomous system. It does not perform all aspects of driving and does not replace the driver. Super Cruise is designed to maintain the current lane, but you must always pay attention in case you need to take control to avoid emergency situations, exit the highway, make a turn, stop for a traffic-control device or perform any other driving maneuver. Super Cruise is only available on compatible roads.

Yes! You must always be ready to take control of the steering or brakes while using Super Cruise. To ensure you’re staying focused on the road, a Driver Attention System camera located atop the steering column monitors driver head and eye position to estimate driver attention to the road. If the system detects you may not be paying enough attention, the steering wheel light bar flashes green. If you continue to remain inattentive, or if you need to take control of the vehicle immediately, the bar will flash red.

In the case of an unresponsive driver, after the first two levels of alerts, a voice prompt will be heard and the vehicle will slow to a complete stop with its hazard lights activated. The vehicle will contact Safety Services so an OnStar® Emergency-Certified Advisor can communicate with the driver.

Activating Super Cruise is simple and convenient. When you’re on a compatible road, turn on your vehicle’s Adaptive Cruise Control and set a speed. Then look for the white Super Cruise steering wheel symbol in the Driver Information Center. When it appears, Super Cruise is available. Simply push the Super Cruise button on your steering wheel (it looks like a steering wheel) to enable. The light bar at the top of your steering wheel will turn green when Super Cruise is active. When it is safe to do so, and in compliance with any local laws, you may now take your hands off the steering wheel — while keeping your eyes on the road.

Of course, as every vehicle is different, you should consult your vehicle Owner’s Manual for detailed instructions or ask your authorized dealer for more information.

When enabled, and under certain conditions, Turn Signal Activated Lane Change and Automatic Lane Change can steer the vehicle to perform a single lane change without any input needed from the driver. For example, the system can pass a slower vehicle in its lane, change lanes if the current lane is ending or change lanes to provide space for vehicles merging from an ending lane. A message appears in the Driver Information Center to offer more information on the status of the maneuver.

If you’d like to take control of the vehicle after Super Cruise has been activated, place your hands firmly on the steering wheel. The Super Cruise system will detect that you have taken over control, and the steering wheel light bar will change from green to blue. When the light bar is blue, Super Cruise will stop steering and you must steer the vehicle. To reactivate Super Cruise, center the vehicle in the lane and wait for the light bar to turn green. If you would like to take over steering and deactivate Super Cruise, you can do so by firmly placing your hands on the steering wheel and pressing the Super Cruise button or the brake pedal.

If Super Cruise disengages while you’re using it, simply push the Super Cruise button within 10 seconds of disengagement for more information. A message will appear in the Driver Information Center with an explanation such as, “No Road Information,” “Driving in Exit Lane” or “Looking Away from Road for Too Long.” You can find descriptions of these messages in your vehicle Owner’s Manual.

Super Cruise uses a data connection for real-time, precise positioning of the vehicle, as well as to download regular map updates that help ensure your vehicle has the most up-to-date, accurate maps available for hands-free driving. An active, eligible service plan or trial is required to maintain that data connection.

The 2026 Enclave equipped with Super Cruise includes 3 years of an eligible service plan including the data connectivity required for Super Cruise functionality. At the end of the vehicle’s trial period, you’ll need to purchase an eligible service plan in order to keep using Super Cruise.

The simplest way to sign up for an eligible service plan is to push the blue OnStar button inside your Super Cruise-equipped vehicle and speak to an Advisor. They’ll be able to assist you through the sign-up process. You can also visit GM account, or call us at 1-888-4ONSTAR (1-888-466-7827).