You are currently viewing Buick.com (United States). Close this window to stay here or choose another country to see vehicles and services specific to your location.

Continue
Close

back to mybuick mobile app back to mybuick mobile app Back to myBuick Mobile App

how to

How to send Remote Commands to your vehicle

The myBuick mobile app* lets you send Remote Commands*   to your vehicle, if your vehicle is properly equipped and your active service plan supports this service. The essential controls are found on the My Vehicle tab of your vehicle’s app, with additional options found on the Controls tab. The available controls are found on the Home screen of your vehicle’s app and vary depending on the features of your vehicle.

 

Learn more about the app and how to get started.

Using the remote start command

Start the vehicle so it’s ready for your departure or cancel a remote start* command.

 

  1. From the app’s home screen on the My Vehicle tab, press and hold the center Climate icon (on some vehicles, you tap the Start icon).
  2. The button will say “Sent” once the command is successful.
  3. On equipped vehicles, tapping the center Climate or Start icon again turns the vehicle or Climate off and/or changes temperature.

Remote lock/unlock

Remotely unlock or lock your vehicle’s doors.
 

  1. From the My Vehicle tab on the app’s Home screen, tap the Lock or Unlock icon.

 

In addition to remote start and lock/unlock*, your vehicle may also support other commands from the mobile app. In the Home screen of the Controls tab, you’ll see all of your available controls. You can also tap Learn More for more information on Remote Commands.

 
  • Stop/start alarm: Tap the Sound Alarm or Stop Alarm icon.
  • Flash lights: Tap the Flash Lights icon or the Stop Lights icon.

 

 

 

If the command fails, here are some things to check before attempting the command again:
 

  • Remove the key fob from the vehicle and ensure any manual key is removed from the ignition.
  • Make sure you are at least 10 feet away from the vehicle.
  • Check that all doors and the trunk, hood and gas cap are closed.
  • Make sure hazard lights are turned off.

 

If an error occurs while trying to use a remote command, go to your app’s Command History page, then:
 

  • Tap your initials > Settings > Command History.
  • Tap the Triangle icon to view the error and recommended resolution.

‒ If no errors are identified, continue to the next step.

  • Start the vehicle, let it run for 60 seconds, then turn the vehicle off.
  • Retry the remote command.

For your security, please don’t include personal info such as phone number, address or credit card details.

Related links and resources

How to use myBuick Mobile App

Q&As

I’m unable to remote start or unlock my vehicle with a remote command. What can I do to resolve this?

There are many reasons a remote start or unlock could fail. Here are some things to double-check before trying the command again:

 

  • Turn off the vehicle. If the engine is on, this will block remote start.
  • Make sure the key fob battery is strong.
  • Confirm that your vehicle and app are connected. Both must have a stable internet connection for remote commands to be successful.
  • Make sure your mobile app version is up to date.

What if my vehicle and/or remote commands aren’t showing up?

First, make sure you’ve selected the correct vehicle. Open the app and tap your initials, then swipe left or right to browse vehicles. Tap to select.

 

You can also check the connection status of your vehicle in this menu. Or you can log into the brand website for your vehicle and select Account Overview.

 

If your vehicle is shown as connected:
Tap your vehicle > Manage Plans > See Details to confirm remote commands are included.

 

If your vehicle is not listed or shown as not connected:

 

1. Tap Add Vehicle > your vehicle > Continue.
 

2. Follow the prompts to confirm vehicle/account details (be sure to enter the same phone number or email provided to your Dealer).
 

3. Choose where to receive a one-time passcode (OTP).
 

4. Enter the 6-digit code when received.
 

‒ If not received after 1 minute, tap “Try again” to request a new code.
 

5. Confirm your vehicle and OnStar plan.
 

6. Return to the app and sign out/sign back in.

Our support search experience is powered by an AI assistant.

Need more help?

Submit a support request to get answers to your vehicle questions about over-the-air software updates, driving and safety features, Wi-Fi issues and more.
Request Support

For information specific to your vehicle, please refer to your Owner’s Manual.